.jpg)
O-PADS are a significant upgrade to the OEM pads originally provided by the handlebar manufacturer. Comfort, weight, compression, durability, grip, and cleanability are all improved. These are designed by cyclists and field tested under all riding and race conditions.Improve your comfort and performance!
Ultimate Comfort
Soft Fabric Lined
Long Life Non-Fatiguing Foam
Water Resistant Closed Cell Foam
Washing Machine Safe
15mm Thick
Replacement Velcro® Included
Basic Prep Kit Included
Satisfaction Guarantee
One Year Warranty
- Lightweight
3T Compact
- Contents
- Pair of O-PADS
- Matching industrial grade Velcro® hook sheet
- Basic Prep Kit
Prep Kit Directions-
If the original hook surface on the arm rests is in good condition and does well holding the pads in place, there is no need to replace it. Save the replacement Velcro® hook sheet for later use when needed.
-
If replacing the original Velcro® hook material on your arm rests, make sure to wash off any dirt, scrape off all the adhesive with the included plastic scraper, and use the alcohol wipes to remove any oils. The better the preparation, the better the industrial hook sheet will adhere to the arm rests.
-
Once the surface is clean and dry, carefully apply the Velcro® hook sheets with care. Starting with the center and working your way out, firmly press into place over the entire surface of the armrest. Wait 2 hours before placing the pads and pulling on the hook surface in any way.
-
Temperature should be greater than 60ºF/16ºC for Velcro® to fully adhere to the armrest
Pad Care
- Spot clean as needed by hand with a cloth
- The pads are removable and washable. Use your washing machine’s delicate cycle with cold water and a mild detergent. Air dry with no heat
- When transporting the bike outside of a vehicle, it is advised to remove the pads
- Do not clean with a high pressure washer or stiff bristle brush